Archive for the ‘Kitchen Home Improvement’ Category

Choosing Kitchen Countertops To Meet Your Needs

Wednesday, April 11th, 2018

byAlma Abell

If you are remodeling your kitchen, your countertops are likely one of your top considerations. A solid countertop will last many years, and will enhance the look of the entire room. With so many choices available, it can be hard to choose which one may be the best fit for your kitchen. When shopping for kitchen countertops in Brooklyn, or any other major city in North America, you should be aware of the different choices available to you.

  • Granite: This is by far the most popular surface because of its looks and durability. Granite is easy to clean and maintain, will not fade and is heat resistant. It is also resistant to scratches, dents and chips.
  • Marble: This is similar to granite, but more costly. More care and maintenance is needed with marble because it’s more delicate. There is no denying, though, that marble gives a look that is hard to beat.
  • Laminate: This can be the most cost-effective option for those on a budget. It is popular because it comes in a wide variety of designs and colors. Laminate can scratch easily and is not heat resistant.
  • Solid-surface: These are also a very popular choice and come in an array of colors and pigments. Scratches can be sanded out and they are stain resistant.
  • Concrete: This is gaining popularity as a countertop material and is available in several finishes, colors and pigments. To protect from scratches and discoloration, these need to be sealed every few months and waxed with a special paste.
  • Wood: A wood countertop, like a big butcher’s block, can instantly warm up the look of a kitchen. Scratches can be sanded out and they are easy to maintain. Water can damage the countertop so it needs to be sealed regularly for protection.

Kitchen countertops in Brooklyn can be found at many different home specialty stores, such as Italian Tile.

Understanding The 5 General Facts About Wood Flooring

Wednesday, November 15th, 2017

By Danica Reynes

One should know the basic facts of wood flooring and they are: solid hardwood flooring is comprised only of wood; you may choose from unfinished or prefinished solid hardwood flooring; it is strongly advised not to install hardwood floors directly over an existing floor or in areas that are usually wet; you can save more with engineered wood flooring compared to solid hardwood; and engineered wood flooring offers many options in its installation process.

Homeowners favor wood flooring from other kinds of flooring for their houses. Rooms seem to look warm and cozy because of the ageless style that wood floors possess. There are many options for wood flooring. That is why; choosing Birmingham hardwood floors or any other wood flooring you would prefer for your home needs an understanding of the essential facts about it.

Solid hardwood flooring comprises of pure wood only

Hardwood floor is the most common reference to solid hardwood. The composition of hardwood floor makes it more expensive than other floor types. Just like any stick of lumber, it is sawn directly from the log and does not have any other material added to it. Hardwood floors can last forever if taken care of properly. Sanding out dents and scratches is also easy to do. Because it is environmentally safe, bamboo flooring has also gained popularity as hardwood flooring.

YouTube Preview Image

Solid hardwood flooring is available as unfinished or prefinished

Two options can be chosen in buying hardwood floor: unfinished or prefinished. After installation, unfinished hardwood floor needs to be sand, sealed and maybe stained, whereas prefinished hardwood can be walked on immediately after installation. This additional work makes unfinished hardwood cheaper than prefinished ones. Many choose to buy unfinished hardwood because they can stain the floor just the way they like it.

It is prohibited to install hardwood floors directly over an existing floor or in soggy places

Hardwood flooring is installed by nailing them over a wooden sub-floor. Its method of installation is different from other wood flooring alternatives because it cannot be directly mounted over concrete or any existing floor surface. Additionally, it is recommended not to install hardwood floors in damp areas like basements or bathrooms. Hardwood floors have a meticulous installation procedure; thus, it is strongly advisable to employ professionals to do the work.

You can save more with engineered wood flooring compared to solid hardwood

The components of engineered wood flooring are finished wood and plywood. The finished wood makes up the surface that you walk on while the plywood makes up the greater part of the lower portion. Because it is not made up entirely of solid wood, this material is cheaper. However, engineered wood flooring can be suited in damp areas because of its plywood composition. The drawback however is that you cannot sand the surface because the top layer is quite thin. Additionally, since it cannot be sanded, hollows and scratches should be avoided as much as possible.

You may install engineered wood flooring in different ways

Installation for engineered wood flooring can be done in many ways. Its installation process is more convenient than that of hardwood since sub-floors are no longer necessary. In fact, you may be able to nail it directly over your existing floor as long as it is stable and level.

It will be of great help for you if you understand the basic properties and characteristics of wood flooring so that it would be more convenient when deciding which one is perfect for your home.

About the Author: Information about

Birmingham hardwood floors

can be found on this website: http://www.kapaluafloors.com/birmingham-hardwood-refinishing.php

Source:

isnare.com

Permanent Link:

isnare.com/?aid=712218&ca=Home+Management